| Crescent Tank Manufacturing: Designing Portable Toilet Service Trucks For Sanitation Professionals Expecting More From Their Vacuum Truck Than Simply Running A Route. |
Our unique rectangle design allows portable
toilet service drivers to do pick up and delivery
during a standard route saving valuable time
and fuel making our tank design the most
efficient in it's class!
toilet service drivers to do pick up and delivery
during a standard route saving valuable time
and fuel making our tank design the most
efficient in it's class!
Model 900- Service And Toilet Delivery Truck
Mounted on 15,000 GVW vehicle or greater.
650-gallon waste tank includes:
•12 ft bed length
•1/4" mild steel construction
•Diamond plate deck
•2" double primary trap
•2" easy clean secondary trap
•2-3" site glass waste level indicators
•2" ball valve allowing vacuum from either
side•3" discharge ball valve
•25'-2" TigerTail vacuum hose with wand
assembly
•Masport Pump
•Thielman Tailgate TVL - 16 1200lbs.
Electric/hydraulic
•This model holds 4 to 6 portable toilets
250-gallon fresh water tank includes:
•1/4" poly-rotomolded plastic tank
•Fresh water wash down system
•25' x 3/8" retractable hose and reel
•1.5" Fast fill hose
Model 1100- Service And Toilet Delivery Truck
Two Vehicles...for the Price of One!
Finally a solution to the requirement of having a delivery
vehicle and a service vehicle. One Vehicle that does it all! A
vehicle that allows you to use the entire bed for its intended
use, hauling your portable toilets, while also using it to hold
your liquid waste and fresh water. Crescent Tank Mfg.TM
introduces their all new Crescent Septage Vacuum Tank,
that’s rectangular!
Crescent Tank Mfg.TM has 30 years experience in sanitation
service industry. Their development of the Rectangular
Septage Vacuum Tank is unsurpassed. The Rectangular Tank
has been field tested by Crescent Tank Mfg.TM for 12 years
now and has proven to be a valuable asset in the portable toilet
service industry.
The Crescent Rectangular Septage Vacuum Tank is one-of-a-
kind in the industry and will surpass the old round tanks of
yesterday. The Rectangular Tank will hold up to 1400 gallons
of liquid storage. The Tank itself is made from one quarter of
an inch steel and is durable enough to outlast any vehicle. The
liquid waste and fresh water tanks are made from plastic and
aluminum, allowing no rust in the compartments. The fresh
water tank also helps with air flow over portable toilets. The
Crescent Rectangular Septage Vacuum Tank also has a
positive full tank drain on the rear making the tank simple to
use.
Rectangular is better. The advantages of having a
rectangular septage vacuum tank verses a round tank are
simple. A round tank takes up the entire area of the truck
leaving no room for anything else. A Crescent Rectangular
Septage Vacuum Tank utilizes the space above the tank by
maintaining the benefits of a flat-bed. Haul up to 10 portables
with a rectangular tank, haul 0 portables with a round tank.
The Crescent Rectangular Septage Vacuum Tank is an easy to
use, full service, one man operation.
The revolutionary design of the Crescent Rectangular Septage
Vacuum Tank will take the sanitation service industry to new
heights. Out with the ROUND, In with the
RECTANGULAR.
Finally a solution to the requirement of having a delivery
vehicle and a service vehicle. One Vehicle that does it all! A
vehicle that allows you to use the entire bed for its intended
use, hauling your portable toilets, while also using it to hold
your liquid waste and fresh water. Crescent Tank Mfg.TM
introduces their all new Crescent Septage Vacuum Tank,
that’s rectangular!
Crescent Tank Mfg.TM has 30 years experience in sanitation
service industry. Their development of the Rectangular
Septage Vacuum Tank is unsurpassed. The Rectangular Tank
has been field tested by Crescent Tank Mfg.TM for 12 years
now and has proven to be a valuable asset in the portable toilet
service industry.
The Crescent Rectangular Septage Vacuum Tank is one-of-a-
kind in the industry and will surpass the old round tanks of
yesterday. The Rectangular Tank will hold up to 1400 gallons
of liquid storage. The Tank itself is made from one quarter of
an inch steel and is durable enough to outlast any vehicle. The
liquid waste and fresh water tanks are made from plastic and
aluminum, allowing no rust in the compartments. The fresh
water tank also helps with air flow over portable toilets. The
Crescent Rectangular Septage Vacuum Tank also has a
positive full tank drain on the rear making the tank simple to
use.
Rectangular is better. The advantages of having a
rectangular septage vacuum tank verses a round tank are
simple. A round tank takes up the entire area of the truck
leaving no room for anything else. A Crescent Rectangular
Septage Vacuum Tank utilizes the space above the tank by
maintaining the benefits of a flat-bed. Haul up to 10 portables
with a rectangular tank, haul 0 portables with a round tank.
The Crescent Rectangular Septage Vacuum Tank is an easy to
use, full service, one man operation.
The revolutionary design of the Crescent Rectangular Septage
Vacuum Tank will take the sanitation service industry to new
heights. Out with the ROUND, In with the
RECTANGULAR.
•Mounted on 19,500 GVW vehicle or
greater.
750-gallon waste tank includes:
•14 ft bed length
•1/4" mild steel construction
•Diamond plate deck
•2" double primary trap
•2" easy clean secondary trap
•2-3" site glass waste level indicators
•2" ball valve allowing vacuum from either
side
•3" discharge ball valve
•25'-2" TigerTail vacuum hose with 90
wand assembly
• Sub-frame to mount direct, w/mud flaps,
2-36" Aluminum tool box's. 14' body with
14'8" overall. (customer to mount)
•Thielman Tailgate TVL - 16 1200lbs.
Electric/hydraulic
Masport Pump
•Will fit on and approx. 108 - 120 CA
frame.
•This model holds 6 to 8 portable toilets
350-gallon fresh water tank includes:
•1/2" poly-rotomolded plastic tank
•Fresh water wash down system
•50' x 3/8" retractable hose and reel
mount drive side between cab/box
•1.5" Fast fill
Rectangular Septage Vacuum Tanks For Flat Beds
| Cost Effective Full Delivery & Service Vehicle - Completely Self Contained Or Hook Up To Your Truck's Pump - Hold Up To 1400 Gallons Of Liquid Storage - 12 Years In Service Experience - Field Tested By Manufacturer Running Portable Toilet Service Routes - Rail Type Gate Makes Use Of Any Hitch Design -Remove Tank Assembly In Slow Times Or Rent A Truck To Use As Needed -Plastic & Aluminum Allow No Rust In Water Compartment -Substantially Reduces Insurance Costs & Fuel Expenses - Reduces Payroll Costs - Increases Service Response Time - Haul Up To 10 Portable Toilets Before Using Lift gate -Purchase The Tank Or The Whole Truck - Increase Productivity By Reducing Trip Times - Order Without The Vacuum Pump And Use Your Existing Pump - 1/4 Steel Tank Built To Outlast Your Truck - Custom Sizes And Designs - East To Use, One Man Operation - Positive Full Tank Drain On Rear |
| New To The Portable Toilet Industry and Vacuum Tank Equipment ? |
Vacuum has become universally accepted as the best and most efficient method of pumping liquid wastes.
The advantage of vacuum is that the waste products never come in contact with the pump. Materials that
would normally ruin a product pump are easily handled by a vacuum system because the only medium in
contact with the vacuum pump is air.
COMPONENTS IN A VACUUM SYSTEM
A. TANK
The tank must be a pressure vessel capable of withstanding vacuum. It is normally made of 1/4" steel and can
have dished ends, or in our design rectangular shape.
B. PRIMARY SHUTOFF
When the tank is near capacity, the liquid raises a float ball, which contains a ball seat and shuts off the
airflow to the pump.
C. SECONDARY SHUTOFF (SCRUBBER)
The secondary shutoff has a float type shutoff similar to the primary shutoff and stops airflow to the pump if
the primary shutoff malfunctions. A properly designed secondary will also scrub the air as it passes through
removing water vapor and droplets.
D. FINAL FILTER
A filter usually made of wire mesh designed to catch particulate matter before it enters the pump, greatly
extending pump life. A filter should be capable of catching gritty material down to .020"
E. Vacuum Pump
Usually a rotary vane type used to evacuate air from the tank. Optionally equipped with a four- way valve to
allow the pump to be used also as a compressor for agitation or pressure discharge. There are many different
sizes and types available, depending on your particular needs.
F. OIL CATCH MUFFLER
Because rotary pumps are constantly oiled, oil is discharged in the exhaust flow. An oil catch muffler should
be used to catch this oil and quiet the pump. The oil catch should also have to allow drainage of used oil.
G. VALVES
Valves normally range in size from 2" to 6". Full open ball valves and gate valves are considered best for this
application because there are no protrusions in the product flow.
The advantage of vacuum is that the waste products never come in contact with the pump. Materials that
would normally ruin a product pump are easily handled by a vacuum system because the only medium in
contact with the vacuum pump is air.
COMPONENTS IN A VACUUM SYSTEM
A. TANK
The tank must be a pressure vessel capable of withstanding vacuum. It is normally made of 1/4" steel and can
have dished ends, or in our design rectangular shape.
B. PRIMARY SHUTOFF
When the tank is near capacity, the liquid raises a float ball, which contains a ball seat and shuts off the
airflow to the pump.
C. SECONDARY SHUTOFF (SCRUBBER)
The secondary shutoff has a float type shutoff similar to the primary shutoff and stops airflow to the pump if
the primary shutoff malfunctions. A properly designed secondary will also scrub the air as it passes through
removing water vapor and droplets.
D. FINAL FILTER
A filter usually made of wire mesh designed to catch particulate matter before it enters the pump, greatly
extending pump life. A filter should be capable of catching gritty material down to .020"
E. Vacuum Pump
Usually a rotary vane type used to evacuate air from the tank. Optionally equipped with a four- way valve to
allow the pump to be used also as a compressor for agitation or pressure discharge. There are many different
sizes and types available, depending on your particular needs.
F. OIL CATCH MUFFLER
Because rotary pumps are constantly oiled, oil is discharged in the exhaust flow. An oil catch muffler should
be used to catch this oil and quiet the pump. The oil catch should also have to allow drainage of used oil.
G. VALVES
Valves normally range in size from 2" to 6". Full open ball valves and gate valves are considered best for this
application because there are no protrusions in the product flow.
| Crescent Tank Manufacturing * The Septage Vacuum Tank Experts 2557 Cannan Road, Bloomfield, NY 14469 Phone: 585-657-4104 |
Convenient work station promotes quick
and easy servicing-Perfect for starting up
or those running thousands of portable
toilets
and easy servicing-Perfect for starting up
or those running thousands of portable
toilets
Now, this is a line up of portable toilet service vehicles
 |
 |
 |
 |
 |
 |
Engineered to
Enhance your
profits!
Built to
perform!
Built to last!
Enhance your
profits!
Built to
perform!
Built to last!
This service vehicle is shown without portable toilets
Above this service vehicle is shown with portable
toilets (not included).
toilets (not included).
| Click Truck For more Information on Model 1350 Portable Toilet Service*Pick Up And Delivery Truck |
| PSAI Booth # 90 |